tC L4-2.4L (2AZ-FE) (2005)
/Page-333006.png)
NOTICE:
-
Remove any oil from the contact surface.
-
Install the chain cover within 3 minutes of applying seal packing.
-
Do not put in engine oil for at least 2 hours after installing the chain cover.
c. Apply a continuous bead of seal packing as shown in the illustration.
Seal packing: Part No. 08826-00080 or equivalent
NOTICE:
-
Remove any oil from the contact surface.
-
Install the chain cover within 3 minutes of applying seal packing.
-
Do not put in engine oil for at least 2 hours after installing the chain cover.
d. Install the timing chain cover with the 14 bolts and 2 nuts.
Torque:
9.0 Nm (92 kgf-cm, 80 inch lbs.) for bolt A
25 Nm (255 kgf-cm, 18 ft. lbs.) for bolt B
55 Nm (561 kgf-cm, 41 ft. lbs.) for bolt C
