tC L4-2.4L (2AZ-FE) (2005)
/Page-921009.png)
e. Tighten the lock nut.
Torque: 47 Nm (480 kgf-cm, 35 ft. lbs.)
f.
Apply MP grease No.2 to the parts indicated in the illustration and install the front suspension support dust cover.
15. INSTALL SPEED SENSOR FRONT LH
a. Install the front flexible hose No.1 and speed sensor front LH with the bolt.
Torque: 19 Nm (194 kgf-cm, 14 ft. lbs.)
16. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
a. Install the front stabilizer link assembly to the front shock absorber with coil spring with the nut.
Torque: 74 Nm (755 kgf-cm, 55 ft. lbs.)
HINT: Use a hexagon wrench (6 mm) to hold the stud if the ball joint turns together with the nut.
17. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
18. INSTALL COWL TOP VENTILATOR LOUVER LH
19. INSTALL HOOD TO COWL TOP SEAL
20. INSTALL FR WIPER ARM LH
21. INSTALL FR WIPER ARM RH
22. INSTALL FRONT WIPER ARM HEAD CAP
23. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
