tC L4-2.4L (2AZ-FE) (2005)
Clutch Pedal Assembly: Service and Repair
CLUTCH PEDAL SUB-ASSEMBLY (MTM)
REPLACEMENT
NOTICE: When disconnecting the battery terminal, initialize the system(s) shown after the terminal is reconnected.
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO.1
3. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY UPPER
4. DISCONNECT CONNECTORS
a. Disconnect the clutch start switch connector.
b. Disconnect the clutch switch connector.
5. REMOVE CLUTCH PEDAL SPRING
6. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS W/HOLE PIN
a. Remove the clip and hole pin.