tC L4-2.5L (2AR-FE) (2011)
Keyless Starting System: Technical Service Bulletins
Smart Key(R) - System Check Procedure
S-SB-0025-10
August 4, 2010
Smart Key System Check During PDS
Service Category
General
Section
Pre-Delivery Service
Market
USA
Applicability
Introduction
Some 2011 model year vehicles are equipped with a Smart Key system which allows the customer to enter and start the vehicle without using a
mechanical key. To ensure the system is operating properly the Smart Key functions (Smart Entry and Smart Start) should be inspected using the
following procedure during Pre-Delivery Service (PDS).
Check all of the Smart Keys using this procedure.
Warranty Information
Inspection Procedure
1. Remove ALL Smart Keys from the vehicle.
The remaining keys need to be a minimum of 3 feet (1 meter) away from the vehicle.
2. Check Smart Entry function at all the doors.
Smart Key MUST be in actuation area No.1 for this check (see Figure 1).