xA L4-1.5L (1NZ-FE) (2006)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. DRAIN BRAKE FLUID
NOTE: Wash off brake fluid immediately if it comes in contact with any painted surface.
3. REMOVE BRAKE ACTUATOR ASSEMBLY WITH BRACKET
a. Release the latch of the actuator connector and disconnect the connector.
b. Using SST, disconnect the 6 brake lines from the brake actuator.
SST 09023-00101