2006 xA L4-15L (1NZ-FE) Ignition Switch Diagrams - Page 1995
5. REMOVE IGNITION SWITCH ASSEMBLY
a. Remove the 2 screws and switch from the steering column bracket.
INSTALLATION
1. INSTALL IGNITION SWITCH ASSEMBLY
a. Install the switch to the steering column bracket with the 2 screws.
2. REMOVE STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY
a. Temporarily install the steering column upper with switch bracket and steering column clamp upper with 2 new steering lock set bolts.
b. Tighten the 2 steering lock set bolts until the bolt heads break off.
3. CONNECT CONNECTOR
a. Connect the 2 connectors as shown in the illustration.
b. Secure the wire harness with the clamps.