xA L4-1.5L (1NZ-FE) (2006)
Air Bag: Service and Repair
Curtain Shield Airbag
Removal and Installation
REMOVAL
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE ROOF HEADLINING ASSEMBLY
a. Remove the roof headlining.
3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY
a. Disconnect the connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
b. Remove the 3 bolts, 4 screws and curtain shield airbag in the order shown in the illustration.
INSTALLATION
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it.
1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY