xA L4-1.5L (1NZ-FE) (2006)
Impact Sensor: Service and Repair
Front Airbag Sensor
REMOVAL
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE NO. 1 AIR CLEANER INLET
a. Remove the bolt and air cleaner inlet.
3. REMOVE FRONT AIRBAG SENSOR LH
a. Disconnect the sensor connector.
b. Remove the 2 bolts and sensor.
4. REMOVE FRONT AIRBAG SENSOR RH
a. Disconnect the sensor connector.
b. Remove the 2 bolts and sensor.
INSTALLATION
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it.