xB L4-1.5L (1NZ-FE) (2004)
Wheel Speed Sensor: Service and Repair
Speed Sensor Front
SPEED SENSOR FRONT LH
REPLACEMENT
HINT: Replace the RH side by using the same procedures as those for the LH side.
1. REMOVE FRONT WHEEL
2. REMOVE BATTERY
3. REMOVE SPEED SENSOR FRONT LH
a. Disconnect the speed sensor connector.
b. Remove the 2 clamp bolts holding the speed sensor wire harness from the body and the shock absorber.
c. Disconnect the resin clip and the speed sensor wire harness from the shock absorber.
d. Remove the bolt and the speed sensor front LH.
NOTICE: Prevent foreign matter from attaching to the sensor tip.
4. INSTALL SPEED SENSOR FRONT LH