xB L4-1.5L (1NZ-FE) (2004)
NOTICE:
^
Tap in the gasket in the correct direction.
^
Do not reuse the removed gasket.
^
Be sure not to push in the gasket when installing the exhaust pipe.
d. Connect the 2 exhaust pipe supports, and install the exhaust pipe front.
e. Install the 2 compression springs and 2 bolts.
Torque: 43 Nm (438 kgf-cm, 32 ft. lbs.)
f.
Connect the 2 heated oxygen sensor connectors.
g. Install the grommet.
7. INSTALL EXHAUST PIPE ASSY TAIL
a. Install a new gasket to the exhaust pipe front.
b. Connect the 2 exhaust pipe supports, and install the exhaust pipe tail.
c. Install the clamp with the bolt as shown in the illustration.
Torque: 32 Nm (326 kgf-cm, 24 ft. lbs.)
8. CHECK FOR EXHAUST GAS LEAKS
9. INSTALL FLOOR PANEL BRACE FRONT
10. INSTALL CONSOLE BOX ASSY REAR
11. INSTALL SHIFT LEVER KNOB SUB-ASSY (M/T TRANSAXLE)