xB L4-1.5L (1NZ-FE) (2004)
NOTE:
-
Do not use tools such as a screwdriver to remove the tube.
-
Cap the open fittings immediately to keep moisture or dirt out of the system.
f.
Remove the 2 O-rings from the suction hose sub-assy.
NOTE: Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
3. DISCONNECT LIQUID TUBE SUB-ASSY A
HINT: Disconnect the liquid tube sub-assy A in the same way as for the suction hose sub-assy.
SST 09870-00025
4. REMOVE HEATER CONTROL KNOB
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY CTR
6. REMOVE INSTRUMENT PANEL SUB-ASSY W/PASSENGER AIRBAG ASSY
HINT: Refer to the instructions for removal of the instrument panel sub-assy w/passenger air bag assy.
7. REMOVE INSTRUMENT PANEL ASSY LOWER W/INSTRUMENT PANEL REINFORCEMENT
HINT: Refer to the instructions for removal of the instrument panel assy lower w/instrument panel reinforcement.
8. REMOVE AIR CONDITIONING AMPLIFIER ASSY
9. REMOVE ECM
a. Disengage the 2 claws and remove the cover.
b. Disconnect the connector.
c. Remove the 2 screws.
d. Disengage the 2 claws and remove the ECM.
10. REMOVE AIR CONDITIONING BLOWER ASSY