xB L4-1.5L (1NZ-FE) (2004)
26. INSTALL LIQUID TUBE SUB-ASSY A
a. Remove the attached vinyl tape from the hose.
b. Lubricate 2 new O-rings with compressor oil and install them to the hose.
Compressor oil: ND-OIL 8 or equivalent
c. Install the liquid tube sub-assy A and piping clamp.
HINT: After connection, check the claw fitting of the piping clamp.
27. INSTALL SUCTION HOSE SUB-ASSY
a. Remove the attached vinyl tape from the hose.
b. Lubricate a 2 new O-rings with compressor oil and install them to the hose.
Compressor oil: ND-OIL 8 or equivalent
c. Install the suction hose sub-assy and piping clamp.
HINT: After connection, check the claw fitting of the piping clamp.
d. Install the bracket with the bolt.
Torque: 9.8 Nm (100 kgf.cm, 87 in.lbf)
28. CHARGE REFRIGERANT
SST 07110-58060 (07117-58060, 07117-58070, 07117-58080, 07117-58090, 07117-78050, 07117-88060, 07117-88070, 07117-88080)
Specified amount: 380 ± 30 g (13.9 ± 1.1 oz.)
29. WARM UP ENGINE
30. INSPECT LEAKAGE OF REFRIGERANT