xB L4-1.5L (1NZ-FE) (2004)
Compressor oil: ND-OIL 8 (or equivalent)
C.
Install the 0-ring on the suction hose sub-assembly.
D.
Install the suction hose sub-assembly on the compressor assembly with the bolt.
Torque: 9.8 N.m (100 kgf.cm, 87 in..lbf)
20.
Install the NEW cooler refrigerant discharge hose No. 1.
A.
Remove the attached cap from the hose.
B.
Apply a sufficient amount of compressor oil to a NEW 0-ring and the fitting surface of the compressor assembly.
Compressor oil: ND-OIL 8 (or equivalent)
C.
Install the 0-ring on the cooler refrigerant discharge hose No. 1.
D.
Install the cooler refrigerant discharge hose No. 1 on the compressor assembly with the bolt.
Torque: 9.8 N.m (100 kgf.cm, 87 in..lbf)
21.
Install the fan and the generator belt.
22.
Install the engine under cover RH.
23.
Install the NEW receiver/condenser assembly. Install the receiver/condenser assembly with the 2 bolts.
Torque: 9.8 N.m (100 kgf.cm, 87 in..lbf)
24.
Install the NEW radiator support opening cover.