xB L4-1.5L (1NZ-FE) (2004)
B.
Install the radiator support opening cover with 2 clips.
HINT:
Insert the clips from the back side of the cover (in the opposite direction when removing the cover).
NOTE:
Prevent the packing from coming unstuck when installing the radiator support opening cover.
25.
Install the liquid tube sub-assembly A.
A.
Remove the attached cap from the tube.
B.
Lubricate 2 NEW 0-rings with compressor oil and install them to the hose.
Compressor oil: ND-OIL 8 (or equivalent)
C.
Install the liquid tube sub-assembly A and piping clamp.
HINT:
After connection, check the engagement of the piping clamp.