xB L4-1.5L (1NZ-FE) (2004)
2.
Remove the radiator grille. Remove the 3 clips and radiator grille.
3.
Remove the front fender liner LH.
A.
Remove the 2 screws.
B.
Partially remove the fender liner.
HINT:
Do not remove the fender liner completely but partially so that the bumper cover can be removed.
4.
Remove the front fender liner RH.
HINT:
Use the same procedures for the RH and LH sides.
5.
Remove the front bumper cover.
A.
Put protective tape under the front fender.
B.
Remove the clip and 2 bolts from the upper side of the bumper cover.
C.
Using a screwdriver, disengage the 2 claws and remove the 2 bolts, 6 screws and bumper cover.
HINT:
Tape the screwdriver tip before use.