xB L4-1.5L (1NZ-FE) (2004)
b. When not using the hand-held tester.
1. Remove the circuit opening relay.
2. Using a service wire, connect terminals FP and +B of the relay block.
NOTE: Pay due attention to the terminal connecting position to avoid malfunctions.
3. Turn the ignition switch ON, and check that the fuel pump operates.
NOTE: Do not start the engine.
c. Check that there are no fuel leaks after doing maintenance to the fuel system.
d. Turn the ignition switch OFF.
e. Disconnect the hand-held tester from the DLC3.