xB L4-1.5L (1NZ-FE) (2004)
/Page-1007002.png)
8. SEPARATE PRESSURE FEED TUBE ASSEMBLY
a. Remove the bolt and separate the pressure feed tube assembly.
9. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH
a. Remove the 2 bolts and the front suspension member reinforcement LH.
10. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH
a. Remove the 2 bolts and the front suspension member reinforcement RH.
11. SEPARATE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
a. Remove the bolt and the 2 nuts.
b. Support the front suspension crossmember sub-assembly with the jack.
c. Remove the 4 bolts and separate the front suspension cross member sub-assembly.
12. REMOVE FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1 LH
a. Remove the 2 bolts, nut and the front suspension arm sub-assembly lower No.1.
NOTICE: Do not turn the nut.
