xB L4-2.4L (2AZ-FE) (2009)
(a) Install the front fender liner LH with 3 new grommets.
(b) Install the 8 clips and 4 screws.
(c) Install the pin hold clip.
NOTICE: Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the
slot is vertical.
9. INSTALL FRONT SIDE MUDGUARD LH
(a) Install the front side mudguard with the new grommet and 2 screws.
10. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH