scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Power Door Lock Switch > < Front Door Lock|Page 6488
Page 6
background image

(e) Engage the claw and close the cover.
(f) Install a new door lock wire harness seal on to the rear door lock.

(g) Insert the rear door lock into the rear door outside handle release plate, and set it to the rear door panel.
(h) Make sure that the rear door outside handle frame lock.
(i) Apply adhesive to the threads of the screws.

Adhesive:
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

(j) Using a "TORX" socket wrench T30, install the rear door lock with the 3 screws.

Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)

(k) Connect the connector.

2. INSTALL REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and

Repair/Reassembly

3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
4. INSTALL REAR DOOR QUARTER WINDOW WEATHERSTRIP See: Doors, Hood and Trunk/Doors/Rear Door/Service and

Repair/Reassembly

5. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and

Repair/Reassembly

6. INSTALL REAR DOOR GLASS RUN See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
7. INSTALL REAR DOOR BELT MOULDING ASSEMBLY 
8. INSTALL REAR DOOR WEATHERSTRIP See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
9. INSTALL REAR DOOR CHECK ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly

10. INSTALL REAR DOOR SERVICE HOLE COVER See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
11. INSTALL REAR DOOR TRIM BRACKET See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
12. INSTALL REAR DOOR GLASS INNER WEATHERSTRIP See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
13. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
14. INSTALL REAR DOOR INSIDE HANDLE BEZEL See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
15. INSTALL REAR DOOR ARMREST BASE UPPER PANEL See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)

Power Door Lock Switch > < Front Door Lock|Page 6488