xB L4-2.4L (2AZ-FE) (2009)
Steering Angle Sensor: Service and Repair
Removal
BRAKE CONTROL: STEERING ANGLE SENSOR: REMOVAL
REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. TURN FRONT WHEELS FACING STRAIGHT AHEAD
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
3. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal
4. REMOVE STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
5. REMOVE STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
6. REMOVE SPIRAL CABLE See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Removal
7. REMOVE STEERING ANGLE SENSOR
(a) Disengage the 6 claws and 2 pins, and remove the steering angle sensor from the spiral cable.