xB L4-2.4L (2AZ-FE) (2009)
4. REMOVE FRONT FENDER LINER See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Service and
Repair/Removal
5. REMOVE FRONT SPEED SENSOR
(a) Disengage clamp A from the body.
(b) Disconnect the speed sensor connector.
(c) Disengage clamp B from the body.
(d) Remove the bolt and No. 2 sensor clamp from the body.
(e) Remove the bolt and No. 1 sensor clamp from the shock absorber.
(f) Disengage clamp C from the shock absorber.
(g) Remove the bolt and speed sensor from the steering knuckle.
NOTICE:
-
Keep the speed sensor tip and installation portion free of foreign matter.
-
Remove the speed sensor without turning it from its original installation angle.
Installation
BRAKE CONTROL: FRONT SPEED SENSOR: INSTALLATION
INSTALLATION
1. INSTALL FRONT SPEED SENSOR