xB L4-2.4L (2AZ-FE) (2009)
(b) Remove the clip and separate the flexible hose.
(c) Remove the union bolt, gasket and flexible hose.
Installation
BRAKE: REAR BRAKE FLEXIBLE HOSE: INSTALLATION
INSTALLATION
1. INSTALL REAR BRAKE TUBE FLEXIBLE HOSE
(a) Install the flexible hose with the bolt and new clip.
Torque: 19 Nm (194 kgf-cm, 14 ft-lbf)
NOTICE:
-
When installing the front brake flexible hose, face the identification mark toward the interior of the vehicle and minimize twisting of the
hose.
-
Install the clip as far as it will go.
(b) Using a union nut wrench, install the 2 brake tubes onto the flexible hose while holding the flexible hose with a wrench.
without union nut wrench - Torque: 15 Nm (155 kgf-cm, 11 ft-lbf)
with union nut wrench - Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)