xB L4-2.4L (2AZ-FE) (2009)
(c) Use tags or labels to identify the place to reconnect each brake tube.
-
*1: To front wheel cylinder RH
-
*2: To front wheel cylinder LH
-
*3: To rear wheel cylinder RH
-
*4: To rear wheel cylinder LH
-
*5: From 1st master cylinder
-
*6: From 2nd master cylinder
(d) Disengage the 2 tube clamps from the actuator bracket.
(e) Remove the 3 nuts and brake actuator with bracket.
NOTICE: Do not damage the brake tubes or wire harness.
13. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY
(a) Remove the 4 bolts and actuator bracket.