xB L4-2.4L (2AZ-FE) (2009)
8. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Engage the 2 claws to install the No. 1 parking brake cable into the parking brake cable end stopper.
9. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Connect the No. 3 parking brake cable to the parking brake equalizer.
10. CONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT: Use the same procedure as for the No. 3 parking brake cable.
11. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY See: Parking Brake Lever/Service and Repair/Installation
12. ADJUST PARKING BRAKE LEVER TRAVEL See: Adjustments
13. INSTALL CONSOLE BOX MOUNTING BRACKET
(a) Install the console box mounting bracket with the 5 bolts.
Torque: 27 Nm (275 kgf-cm, 20 ft-lbf)
14. INSTALL CONSOLE BOX ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
15. INSTALL CONSOLE BOX CARPET See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
16. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Installation
17. INSTALL REAR WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
18. INSPECT FOR EXHAUST GAS LEAK