xB L4-2.4L (2AZ-FE) (2009)
Acceleration/Deceleration Sensor: Service and Repair
Removal
BRAKE CONTROL: YAW RATE AND ACCELERATION SENSOR: REMOVAL
REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing. See: Restraint Systems/Air Bag Systems/Service Precautions.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT SEAT HEADREST ASSEMBLY See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Removal
3. REMOVE SEAT TRACK COVER See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Removal
4. REMOVE SEAT TRACK INNER BRACKET COVER See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Removal
5. REMOVE FRONT SEAT ASSEMBLY See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Removal
6. REMOVE YAW RATE AND ACCELERATION SENSOR
(a) Remove the 2 bolts and yaw rate and acceleration sensor bracket.
(b) Disconnect the yaw rate and acceleration sensor connector.
NOTICE: Do not remove the installation nuts.