xB L4-2.4L (2AZ-FE) (2009)
/Page-627002.png)
(d) Install and lock the air cleaner cap sub-assembly and air cleaner hose and then tighten the No. 1 air cleaner hose clamp.
(e) Connect the No. 2 fuel vapor feed hose.
(f) Connect the No. 2 ventilation hose to the air cleaner hose.
(g) Install the vacuum switching valve assembly.
(h) Install the wire harness.
(i) Connect the mass air flow meter connector.
3. ADD ENGINE COOLANT See: Coolant/Service and Repair
4. INSPECT FOR COOLANT LEAK See: Testing and Inspection
