xB L4-2.4L (2AZ-FE) (2009)
NOTICE: Do not lift the engine more than necessary.
21. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET
(a) Install the engine transverse engine engine mounting bracket with the 3 bolts.
Torque: 55 Nm (561 kgf-cm, 41 ft-lbf)
22. INSTALL CRANKSHAFT PULLEY
(a) Using SST, fix the pulley in place and tighten the bolt.
SST: 09213-54015
91651-60855
SST: 09330-00021
Torque: 180 Nm (1835 kgf-cm, 133 ft-lbf)
(b) Turn the crankshaft counterclockwise, then disconnect the plunger knock pin from the hook.
(c) Turn the crankshaft clockwise, then check that the plunger is extended.