xB L4-2.4L (2AZ-FE) (2009)
Compressor HVAC: Service and Repair
Removal
AIR CONDITIONING: COMPRESSOR (for 2AZ-FE): REMOVAL
REMOVAL
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Service and Repair
2. REMOVE REAR ENGINE UNDER COVER RH
3. REMOVE NO. 1 ENGINE UNDER COVER
4. REMOVE FAN & GENERATOR V BELT See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Removal
5. DISCONNECT SUCTION HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the suction hose from the compressor.
(b) Remove the O-ring from the suction hose.
NOTICE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
6. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the discharge hose from the compressor.
(b) Remove the O-ring from the discharge hose.
NOTICE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
7. REMOVE COMPRESSOR ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 bolts and the 2 nuts.