xB L4-2.4L (2AZ-FE) (2009)
1. REMOVE ROOM LIGHT ASSEMBLY
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the room light.
(b) Disconnect the connector.
2. REMOVE NO. 2 ROOM LIGHT BULB
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the shade.
(b) Remove No. 2 room light bulb.
Installation
LIGHTING: ROOM LIGHT ASSEMBLY (for Luggage Compartment): INSTALLATION
INSTALLATION
1. INSTALL NO. 2 ROOM LIGHT BULB
(a) Install No. 2 room light bulb.