xB L4-2.4L (2AZ-FE) (2009)
2. REMOVE BACK DOOR LOCK ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 3 bolts and the back door lock.
Installation
LIGHTING: BACK DOOR COURTESY SWITCH: INSTALLATION
INSTALLATION
1. INSTALL BACK DOOR LOCK ASSEMBLY
(a) Install the back door lock with the 3 bolts.
Torque: 13 Nm (127 kgf-cm, 9 ft-lbf)
(b) Connect the connector.
2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly