xB L4-2.4L (2AZ-FE) (2009)
(d) Reinstall the turn signal flasher assembly.
(e) Reinstall the main body ECU.
NG -- REPLACE MAIN BODY ECU
OK -- REPLACE TURN SIGNAL FLASHER ASSEMBLY
12. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY
(a) Remove the side turn signal light assembly from the outer rear view mirror assembly.
(b) Apply battery voltage to the terminals and check that the side turn signal light illuminates.
OK:
(c) Reinstall the side turn signal light assembly.
NG -- REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY
OK -- Continue to next step.
13. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY (SYSTEM VOLTAGE)
(a) Disconnect the D2 and E2 outer rear view mirror assembly connectors.
(b) Measure the voltage according to the value (s) in the table below
Standard voltage:
(c) Reconnect the outer rear view mirror assembly connectors.
NG -- CHECK HARNESS AND CONNECTOR (OUTER REAR VIEW MIRROR ASSEMBLY - MAIN
BODY ECU)
OK -- REPLACE OUTER REAR VIEW MIRROR ASSEMBLY