xB L4-2.4L (2AZ-FE) (2009)
OK -- Continue to next step.
16. INSPECT MAIN BODY ECU
(a) Remove the main body ECU.
(b) Remove the turn signal flasher assembly from the main body ECU.
(c) Measure the resistance according to the value (s) in the table below.
Standard resistance:
(d) Reinstall the turn signal flasher assembly.
(e) Reinstall the main body ECU.
NG -- REPLACE MAIN BODY ECU
OK -- REPLACE TURN SIGNAL FLASHER ASSEMBLY
17. INSPECT BULB (REAR TURN SIGNAL LIGHT BULB)
(a) Remove the rear combination light assembly.
(b) Apply battery voltage to the terminals and check that the rear turn signal light illuminates.
OK:
(c) Reinstall the rear combination light assembly.
NG -- REPLACE BULB
OK -- Continue to next step.
18. CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - REAR TURN SIGNAL LIGHT BULB)