xB L4-2.4L (2AZ-FE) (2009)
Tire Pressure Warning Reset Switch: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH: INSTALLATION
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RESET SWITCH
(a) Engage the 2 claws to install the tire pressure warning reset switch.
NOTICE: Securely engage the 2 claws.
(b) Connect the tire pressure warning reset switch connector.
2. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: See: Tire Monitoring System/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure