xB L4-2.4L (2AZ-FE) (2009)
Headlamp Dimmer Switch: Service and Repair
Removal
LIGHTING: HEADLIGHT DIMMER SWITCH: REMOVAL
REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
2. POSITION FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal
4. REMOVE STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
5. REMOVE STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
6. REMOVE SPIRAL CABLE See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Removal
7. REMOVE WIPER SWITCH
(a) Disconnect the 2 connectors.
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the wiper switch.
NOTICE: Do not press the claw too hard, as it may be damaged.
8. REMOVE HEADLIGHT DIMMER SWITCH
(a) Disconnect the connector.
(b) Remove the headlight dimmer switch, as shown in the illustration.
(c) Disengage the 2 claws and remove the headlight dimmer switch.