xB L4-2.4L (2AZ-FE) (2009)
(i) Using a screwdriver, stake the nut with the lock plate.
(j) Install the control shaft lever with the nut.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(k) Install the transmission control cable assembly into the control shaft lever with the nut.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)
(l) Connect the connector to the park/neutral position switch assembly.
2. INSTALL NO. 2 BATTERY CARRIER See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Installation
3. INSTALL BATTERY See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Installation
4. INSPECT SHIFT LEVER POSITION See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Testing and
Inspection/U241E Automatic Transaxle/On-Vehicle Inspection
5. ADJUST SHIFT LEVER POSITION See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and
Repair/Removal and Replacement/Installation
6. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY See: Testing and Inspection/On-Vehicle Inspection