xB L4-2.4L (2AZ-FE) (2009)
Ignition Switch: Service and Repair
Installation
2AZ-FE STARTING: IGNITION SWITCH: INSTALLATION
INSTALLATION
1. INSTALL IGNITION SWITCH ASSEMBLY
(a) Install the ignition switch assembly with the 2 screws.
(b) Install the wire harness clamp and connect the 2 connectors.
2. INSTALL STEERING COLUMN COVER (for Lower Side)
NOTICE: If the steering column cover is installed in the incorrect order, it will not be possible to assemble the steering column cover.
(a) Engage the 2 claws to install the steering column cover.