xB L4-2.4L (2AZ-FE) (2009)
(a) Remove the 2 bolts and the rear axle beam assembly.
39. REMOVE REAR TRAILING BUSH LH
(a) Put a matchmark on the rear axle beam assembly so that the mark aligns with the arrow mark on the rear trailing bush LH. (If the rear axle
beam assembly is reused)
(b) Using a chisel and hammer, bend the 2 ribs on the bush.
NOTICE: When removing the bush, do not erase the matchmark on the rear axle beam assembly.
(c) Using SST, remove the bush from the rear axle beam assembly.
SST: 09950-40011
09951-04020
09952-04010
09953-04030
09954-04020
09955-04011
09957-04010