xB L4-2.4L (2AZ-FE) (2009)
Reference
^
After turning the ignition to the "IG-ON" position, the Low Tire Pressure Warning Light will blink for 1 minute and then turn ON until all the tire
pressure warning valves/sensors are activated.
^
The Diagnostic Trouble Codes (DTCs) listed below may be stored in the TPWS ECU until the tire pressure warning valves/sensors are activated.
^
The DTCs will automatically clear when the tire pressure warning valves/sensors are activated.
Activation Procedure
1.
Connect TIS techstream.
2.
Turn the ignition switch to the "IG-ON" position and check that the Low Tire Pressure Warning Light blinks for 1 minute and then remains
illuminated.