xB L4-2.4L (2AZ-FE) (2009)
(a) Align the paint mark on the weatherstrip LH and the protruding portion on the body indicated by the arrow in the illustration, and install the
rear door opening trim weatherstrip LH.
7. INSTALL REAR DOOR SCUFF PLATE LH
(a) Engage the 8 claws and install the rear door scuff plate LH.
8. INSTALL REAR SEATBACK ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Installation
9. INSTALL REAR SEAT CUSHION ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Installation
10. INSTALL DECK FLOOR BOX RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
11. INSTALL DECK FLOOR BOX LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
12. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
13. INSTALL REAR FLOOR CARPET ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
14. REGISTER TRANSMITTER ID
HINT:
See: Testing and Inspection/Programming and Relearning/Registration
15. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT:
See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure
16. INITIALIZE SYSTEM
NOTICE:
-
Be sure to register the transmitter ID of all tires in the ECU before initialization.
-
Be sure to inflate all tires to the proper inflation pressure before initialization.
HINT: See: Testing and Inspection/Programming and Relearning/Initialization