xB L4-2.4L (2AZ-FE) (2009)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Removal
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER: REMOVAL
REMOVAL
NOTICE: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system
before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. REMOVE ROOF HEADLINING ASSEMBLY
HINT: See the steps from "DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL" through to "REMOVE ROOF
HEADLINING" See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal.
2. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Remove the nut and remove the tire pressure warning receiver.
(b) Disconnect the tire pressure warning receiver connector.