xB L4-2.4L (2AZ-FE) (2009)
Seals and Gaskets: Service and Repair
Replacement
U241E AUTOMATIC TRANSAXLE: DIFFERENTIAL OIL SEAL: REPLACEMENT
REPLACEMENT
1. REMOVE FRONT DRIVE SHAFT ASSEMBLY
HINT: See the steps from "DRAIN AUTOMATIC TRANSAXLE FLUID" through "FIX FRONT AXLE ASSEMBLY" ( See: Drive Axles,
Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and Replacement/Removal).
2. REMOVE DRIVE SHAFT BEARING BRACKET
(a) Remove the 3 bolts and remove the drive shaft bearing bracket.
3. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL
(a) Using SST, remove the differential side bearing retainer oil seal.
SST: 09308-00010
4. REMOVE TRANSAXLE HOUSING OIL SEAL
(a) Using SST, remove the transaxle housing oil seal.
SST: 09308-00010
5. INSTALL TRANSAXLE HOUSING OIL SEAL
(a) Coat the lip of a new transaxle housing oil seal with MP grease.
(b) Using SST and a hammer, install the transaxle housing oil seal.