xB L4-2.4L (2AZ-FE) (2009)
/Page-1094003.png)
(a) Disconnect the 2 connectors.
(b) Disconnect the transmission control cable assembly from the shift lever.
(c) Using a screwdriver, pull out the transmission control cable stopper.
NOTICE: Do not remove the stopper. If the stopper is removed, reinstall it to its original position.
(d) Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from
the shift lever retainer.
NOTICE: Do not over-rotate the nut as it will come off the interior spring and the transmission control cable will not be reusable.
6. REMOVE SHIFT LEVER ASSEMBLY
