xB L4-2.4L (2AZ-FE) (2009)
Shifter A/T: Testing and Inspection
U241E Automatic Transaxle
Inspection
U241E AUTOMATIC TRANSAXLE: SHIFT LEVER: INSPECTION
INSPECTION
1. INSPECT SHIFT LOCK CONTROL ECU
(a) Measure the voltage.
HINT: Do not disconnect the shift lock control ECU connector.
Standard voltage:
If the result is not as specified, replace the shift lock control ECU.
(b) Measure the resistance.
HINT: Do not disconnect the shift lock control ECU connector.
Standard resistance:
If the result is not as specified, replace the shift lock control ECU.
2. INSPECT TRANSMISSION CONTROL SWITCH