xB L4-2.4L (2AZ-FE) (2009)
(e) Install the control select cable to the shift lever assembly.
(f) Install the control shift cable to the shift lever assembly.
2. ADJUST TRANSMISSION CONTROL SELECT CABLE See: Adjustments
3. INSTALL INSTRUMENT PANEL FINISH LOWER PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Lower Instrument Panel/Installation
4. INSTALL FRONT NO. 2 CONSOLE BOX INSERT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Lower Instrument Panel/Installation
5. INSTALL FRONT NO. 1 CONSOLE BOX INSERT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Lower Instrument Panel/Installation
6. INSTALL INSTRUMENT CLUSTER FINISH CENTER LOWER PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Lower Instrument Panel/Installation
7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Lower Instrument Panel/Installation
8. INSTALL NO. 1 FRONT FLOOR HEAT INSULATOR
(a) Install the No. 1 front floor heat insulator with the 3 nuts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
9. INSTALL CENTER EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and
Repair/Installation
10. INSTALL FRONT FLOOR CENTER BRACE See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Installation
11. INSTALL AIR CLEANER ASSEMBLY See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and
Repair/Removal and Replacement/Installation
12. INSPECT FOR EXHAUST GAS LEAK