xB L4-2.4L (2AZ-FE) (2009)
Wiper Switch: Service and Repair
Removal
WIPER AND WASHER: WIPER SWITCH: REMOVAL
REMOVAL
Caution: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag
system before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
2. POSITION FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Removal
4. REMOVE STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
5. REMOVE STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
6. REMOVE WIPER SWITCH
(a) Disconnect the 2 connectors.
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the wiper switch.
NOTICE: Do not press the claw too hard, as it may be damaged.