xD L4-1.8L (2ZR-FE) (2008)
Exhaust Pipe: Service and Repair
Removal
2ZR-FE EXHAUST: EXHAUST PIPE: REMOVAL
REMOVAL
1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
2. REMOVE UPPER CONSOLE PANEL
3. REMOVE REAR CONSOLE BOX COVER
4. REMOVE CONSOLE BOX CARPET
5. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
6. REMOVE FRONT CONSOLE BOX
7. REMOVE HEATED OXYGEN SENSOR See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and
Repair/Heated Oxygen Sensor/Installation
8. REMOVE EXHAUST TAIL PIPE ASSEMBLY
(a) Remove the 2 bolts and 2 compression springs.
(b) Remove the 2 exhaust pipe supports and the exhaust tail pipe assembly.
9. REMOVE EXHAUST TAIL PIPE BAFFLE SUB ASSEMBLY
(a) Using a plastic hammer, uniformly tap out and remove the exhaust tail pipe baffle.