Leon Mk1
| Front bumper trim: Assembly overview |
| 1 - | Front anagram |
| q | Installing front company emblem |
| 2 - | Centre radiator grille in the bumper trim |
| q | The bumper trim must be removed prior to removing the centre radiator grille. |
| q | Clipped onto the bumper trim |
| q | Removing and fitting → Chapter |
| 3 - | Bolt |
| q | 2 Nm |
| q | 3 pieces |
| 4 - | Bolt |
| q | 8 Nm |
| q | 5 pieces |
| 5 - | Bracket (rear) |
| q | Fixed to the bodywork using screws → Item |
| q | Removing and fitting → Chapter |
| 6 - | Spreader block |
| q | 2 pieces |
| 7 - | Cover for vehicles with headlamp washer |
| q | Removing and installing the cover for the headlight washer system → Chapter |
| q | Remove and install the nozzle → Electrical system; Rep. gr.92 |
| 8 - | Guide profile |
| q | With clips for fixing to the side of the bumper trim. |
| q | Fixed to the bodywork with the screw → Item |
| 9 - | Bolt |
| q | 1+1 piece |
| q | 2 Nm |
| 10 - | Bolt |
| q | 1+1 piece |
| q | 2 Nm |
| 11 - | Wheel housing moulding |
| q | Fixed with screws |
| 12 - | Spreader block |
| 13 - | Bolt |
| q | 7+7 pieces |
| q | 2 Nm |
| 14 - | Bolt |
| q | 3+3 pieces |
| q | 2 Nm |
| 15 - | Expanding nut |
| q | 2 pieces |
| 16 - | Bolt |
| q | 1+1 piece |
| q | 2 Nm |
| 17 - | Bolt |
| q | 2 Nm |
| q | 3 pieces |
| 18 - | Bottom spoiler |
| 19 - | Side grill |
| q | The fog light |
| q | Fixed to the bumper trim using nine clips |
| q | Removing and fitting → Chapter |
| 20 - | Bolt |
| q | 2 Nm |
| q | 1+1 piece |
| 21 - | Fog lights |
| 22 - | Lower centre radiator grille in bumper lining |
| q | Clipped onto the bumper trim |
| q | Removing and fitting → Chapter |
| 23 - | Bumper trim |
| q | Removing and fitting → Chapter |
