seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Steering column of the switch module, Vehicles ? 05/2010 > < Rain and light detection sensorG397 : removal and fitting
Bulbs for fog lamps: removal and installation
Bulbs for fog lamps: removal and installation
  Note!
Try not to graze the bulb during mounting. The grease marks from the fingers that get left on the bulb, evaporate when the lamp is switched on and mist up the bulb.
   
–  Remove the cover -arrow-.
  E94-0063
–  Uncouple the connector -1- of the halogene lamp -H7- (12 V/55 W).
–  Press the flexible metal brace -2- beyond the tab and fold it outwards.
–  Remove the lamp from the housing.
Install in reverse order but note the following:
–  Place the lamp so that the recess of the lamp holder matches up with the lug of the housing.
–  After installing a new lamp check that the fog lamps work. → Chapter, Lamp operations: verify, and if necessary, adjust.
  E94-0064

Steering column of the switch module, Vehicles ? 05/2010 > < Rain and light detection sensorG397 : removal and fitting