| –
| Release spring retaining clip -arrow- from retaining lugs and swing out. |
| –
| Pull bulb out of housing. |
Note! | Do not touch bulb glass when fitting a new bulb. Fingers leave traces of grease on the glass, which evaporate when the bulb is switched on and cause the glass to cloud over. |
| –
| Insert new bulb so that the recess in the bulb holder aligns with guide lug of housing. |
| –
| Remainder of installation is carried out in the reverse sequence. |
| –
| After installing a new bulb check fog light settings → Booklet10.1. |
|
|
|
