SEAT Workshop Service and Repair Manuals

Removal –  Disconnect the battery earth strap.   Note! For vehicles fitted with a coded radio, first check the anti-theft code. –  Move the selector lever to “P”.

–  Remove the gear selector knob by loosening the lateral securing bolt -arrow-. –  Remove the trim sleeve. –  Remove the selector lever cover by levering first from behind and then remove from the front groove with selector lever in “1”. –  Move the selector lever to “N”.

–  Remove the selector lever cable safety washer -arrow 2-. –  Turn the locking lever downwards -arrow 1-, and release the selector lever cable.

–  Remove the selector lever cable safety washer -1- on the gearbox bracket. –  Release the selector lever cable from the bracket in the engine bay.

–  Remove the bolt -arrow- securing the cable to the selector rod. –  Remove the front part of the exhaust pipe with catalytic converter: → Rep. Gr.26.

–  Remove the exhaust system front bracket -arrows-. –  Remove the front heat shield. –  Release the selector lever cable from the bracket in the sub-frame.

–  Loosen the nut -arrow- and remove the selector lever cable from the protection box.